With Standard Ignition-Relearn Procedure:

1. Inflate all tires to the pressure indicated on tire placard.

2. Turn the ignition to the OFF position and depress brake pedal for one second then release.

3. Turn ignition from OFF to ON for 3 times and stop at ON position (dashboard completely lights on) .

4. Depress brake pedal for one second then release.

5. Turn the ignition to the OFF position.

6. Turn ignition from OFF to ON for 3 times and stop at ON position.

7. When come into training mode, horn will sound and TPMS indicator will flash. 'TRAIN LF TIRE' will appear on message center (if available) . Use TPMS relearn tool to activate sensor, horn will sound to indicate a successful sensor recognition. Repeat this step for RF RR and LR tires.

8. 'TRAINING MODE COMPLETE' will be displayed in the message center after LR tire has been trained. For vehicle without message center display, turn the ignition to the OFF position, the horn will not sound if the training is successfully completed. Repeat the training steps if the horn sounds.

PUSH-BUTTON START-01 (If press the start button only once to enter the ACC mode, see the under relearn procedure , else if have to press twice to enter the ACC mode, please see the next relearn procedure ) , Relearn Procedure:

1. Inflate all tires to the pressure indicated on tire placard.

2. Push the START button to the OFF position and depress brake pedal for one second then release.

3. Press START button 5 times.

4. Depress brake pedal for one second then release.

5. Press START button 6 times.

6. When come into training mode, horn will sound and TPMS indicator will flash. 'TRAIN LF TIRE' will appear on message center (if available) . Use TPMS relearn tool to activate sensor, horn will sound to indicate a successful sensor recognition. Repeat this step for RF RR and LR tires.

7. 'TRAINING MODE COMPLETE' will be displayed in the message center after LR tire has been trained. For vehicle without message center display, turn the ignition key to the OFF position, the horn will not sound if the training is successfully completed. Repeat the training steps if the horn sounds.

PUSH-BUTTON START-02, Relearn Procedure:

1. Inflate all tires to the pressure indicated on tire placard.

2. Push the START button to the OFF position and depress brake pedal for one second then release.

3. Press START button 8 times.

4. Depress brake pedal for one second then release.

5. Press START button 9 times.

6. When come into training mode, horn will sound and TPMS indicator will flash. 'TRAIN LF TIRE' will appear on message center (if available) . Use TPMS relearn tool to activate sensor, horn will sound to indicate a successful sensor recognition. Repeat this step for RF RR and LR tires.

7. 'TRAINING MODE COMPLETE' will be displayed in the message center after LR tire has been trained. For vehicle without message center display, turn the ignition key to the OFF position, the horn will not sound if the training is successfully completed. Repeat the training steps if the horn sounds.

Warning:

Turn the hazard flashers on then off

three times to start the stationary relearn procedure can't relearn the new ID, it only can relearn the ID position when rotating tires.