We're thrilled to share that Foxwell made a strong impact at the INA PAACE Automechanika Mexico 2025 show! Held from July 16 to 18 at Centro Citibanamex in Mexico City

Find the recommended tire pressure – Refer to your Jeep’s owner’s manual or the label located inside the driver’s door jamb. The correct pressure is typically listed in pounds per square inch (psi).

After calibration, the system requires about 30 minutes of continuous driving at speeds of 30–60 mph (48–97 km/h) to automatically learn and reset the baseline pressure.

To diagnose a tire pressure sensor fault, utilize tools like a tire pressure gauge or scan tool. Interpreting warning lights and checking for low air pressure is crucial. If the TPMS light stays on despite correct pressure, faulty sensors or wiring may be the culprit.

With the exception of some Chrysler and Mazda models that may be relearned to the vehicle through a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure.

Relearning the sensors ensures your vehicle maintains optimal tire pressure. Accurate monitoring allows you to quickly address overinflated or underinflated tires.

We're thrilled to share that Foxwell made a strong impact at the INA PAACE Automechanika Mexico 2025 show! Held from July 16 to 18 at Centro Citibanamex in Mexico City

Foxwell successfully participated in The Tire Cologne 2024 in Germany for the first time from June 4 to June 6, 2024.

Once again, it’s time for Automechanika Frankfurt, the leading European trade fair dedicated to the automotive aftermarket, and Foxwell sucessfully attended Automechanika Frankfurt held at Messe Frankfurt from 10th to 15th September, 2024.

Foxwell team recently attended the16th Automechanika Shanghai (AMS) held at Shanghai National Convention and Exhibition Center from 2nd to 5th December, 2020. The exhibition was a huge success through which customers were greatly attracted by Foxwell’s new professional products and high-tech technologies in the automotive diagnostic filed.

Automechanika Shanghai is Shanghai's International Trade Fair for Automotive Parts, Equipment and Service Suppliers. Most important fair in China for automotive aftermarket industry.It was held in Shanghai from 3th to 6th December, 2019. Hundreds of worldwide customers were attracted by Foxwell's powerful and comprehensive products.

Automotive Aftermarket Products Expo (AAPEX) is co-owned by the Auto Care Association and the Automotive Aftermarket Suppliers Association (AASA).

The first step is selecting the appropriate TPMS diagnostic tool for you. There are various types of tools available, including scan tools, activation tools, and combination tools. Scan tools can read and clear TPMS codes but cannot activate the sensors.

TPMS sensors are designed to last for many years – 5-10 years is a likely lifespan. Given their cost, most drivers will be inclined to replace TPMS sensors on an “as needed” basis – in other words, only once their batteries have expired

TPMS sensors are programmed to work with specific vehicle make, model and year. If customers have to replace their TPMS sensors because of repairs or tire rotations, the TPMS sensor is programmed to the vehicle and relearned with a TPMS tool to indicate which sensors are in which tires.

Keep in mind that driving with a malfunctioning TPMS sensor poses risks, so it’s wise to address the problem promptly. Knowing when to replace the TPMS sensor is integral to maintaining your vehicle’s health and your safety on the road. Keep an eye out for the signs of a bad tpms sensor and take action accordingly.

There are two types of TPMS sensors. One of them uses a software-based system (indirect). The second type uses sensors built into the valve stem caps (direct). The latter is the type you can install by yourself.

Activate Almost All TPMS Sensors. This FOXWELL TPMS scan tool T1000 enables you to activate 98% known OEM/Universal TPMS sensors in the market.

Find the recommended tire pressure – Refer to your Jeep’s owner’s manual or the label located inside the driver’s door jamb. The correct pressure is typically listed in pounds per square inch (psi).

After calibration, the system requires about 30 minutes of continuous driving at speeds of 30–60 mph (48–97 km/h) to automatically learn and reset the baseline pressure.

To diagnose a tire pressure sensor fault, utilize tools like a tire pressure gauge or scan tool. Interpreting warning lights and checking for low air pressure is crucial. If the TPMS light stays on despite correct pressure, faulty sensors or wiring may be the culprit.

With the exception of some Chrysler and Mazda models that may be relearned to the vehicle through a driving procedure, a TPMS scan tool is required to complete the vehicle relearn procedure.

Relearning the sensors ensures your vehicle maintains optimal tire pressure. Accurate monitoring allows you to quickly address overinflated or underinflated tires.

TPMS tools are vital for several reasons. They are used primarily for the initial setup, repair, and maintenance of the TPMS system. After tire repairs, replacements, or rotations, the TPMS sensor may need to be relearned or reprogrammed to ensure the sensors are functioning correctly.